Features And Promotion
is a waterproofing plaster used as a membrane on roofs and terraces.
bituminous, cement, mineral stones, structurally flexible, without joints,
especially used in roamable areas such as roofs and terraces are prepared with
the new technology based on a special formula, trowel and plaster can be
applied as a new generation of non-additional membrane plaster. Isoroof New
Generation Supplementary Unsuitable Heat And Water Insulation Membrane roof and
terrace system is a product that can provide 100% water insulation and heat
insulation and has high adhesion property. It is not affected by the UV rays of
the sun and temperature variations. It prevents the formation of bacteria on
the surface. Because it forms a thick layer, it is a walkable structure. Does
not spontaneously ignite, extinguishes spontaneously without spreading flame
when exposed to hot flame. Thanks to this feature "fire retardant
coatings" fits the definition. Its structure is impermeable to water vapor
but it is an ideal material for waterproofing areas such as roofs, terraces and
balconies with living areas underneath.
concrete roofs, tile roofs, metal roofs, trapezoidal sheet,
corrugated-corrugated roofing sheets, polystyrene and polyurethane foams,
mobile home roofs, gravel roofs, terrace roofs, OSB chipboard roofs, bitumen
and galvanized metal roofs, etc. . It is used for waterproofing and heat
insulation purposes in all roofs.
The application surfaces should be free of
dust, dirt and oil and the surface should be dry. Loose layers should be
removed if any, small cracks and defects on the surface should be repaired and
corrected. Patch joints, skirts and roof leaks should be patched and any
repairs or alterations to damaged or leaking roof materials should be made.
On surfaces such as wood, OSB, chipboard,
two layers are applied with a steel trowel without the use of ofix Isofix
insulation primer ”.
Ofix Isofix insulation
applied on surfaces such as metal, glass, PVC and plaster.
If there are joints in the areas where the
application will be made, it should be adhered to the joints by using gypsum
mesh tape and “Isoroof new generation additional non-isolated insulation
membrane ıc should be applied to the edges of the joints with a layer trowel as
a preparation from the front.
Isoroof New Generation Supplementary Unsuitable Membrane Application:
should be used during the application of the first layer of 160g mesh for all
substrates prepared. First coat application should be pulled with a steel trowel
so that the net cannot be seen and left to dry. Between the coats, the
application should be done by waiting for minimum 4 hours depending on the air
temperature. The second coat should be applied on the dried surface with a
steel trowel in the same way.
Isoroof New Generation Supplementary
Unwarranted Membrane is ready for use. Never mix. Minimum two coats should be
used. It is recommended that each coat be applied to the previous floor as a
After 1 day, it is applied as a single layer
with “isoroof roof liquid top coat” roller over the second layer of its color
and the process is terminated.
Oro İsoroof Roof Liquid Top Coat
Sistem is used as the complementary system of İsoroof New Generation
Supplementary Unsuitable Membrane Roof Insulation Plaster.
As the product is water-based, it dries with
the removal of water. The drying time is therefore inversely proportional to
the air temperature. Drying time decreases as temperature increases.
Application below 5 ° C is not recommended. In applications
After the first coat has dried, the second coat should be applied. Avoid
application in frost and extreme heat. The waiting time between the coats is 4
hours and application should be made between + 5 C and +35 C.
3 kg / m² (minimum 3 mm & 4 mm
thickness). 1kg / m2 for 1 mm thickness; It is applied with 3 -3,5 kg steel
trowel in m2 with double application principle. Ready to be diluted with water
or other substances. Consuming more or less can lead to inefficiency and side
effects in product performance. Application surface, rain and water during and
after the application, mechanical impacts and so on. should be protected from
all external factors for 24 hours.
Application at 20 ºC is 4 hours. Ambient
temperature during application should be between +5 ° C and +35 ° C. These values can vary
depending on the ambient conditions.
Store in a cool, dry place away from direct
sunlight in its original sealed packages at +5 to +35 ° C. Keep container closed when
not in use. Protect from freezing. Shelf life is 24 months.
As with all chemical products, food products
should not be in contact with skin, eyes and mouth during handling and storage.
During the application, work clothes, protective gloves, goggles and masks
which comply with occupational health rules should be used.
If swallowed by accident, seek medical
advice. Store out of reach of children.
18kg PE buckets
Standard red, green, white, (can be produced
in desired colors)
Product Exchange And Return Conditions:
When the product is delivered from the
cargo, the packages must be checked, the damaged package or products should not
be received, the signature should not be signed and the cargo officer must
determine the damage report.
If the couriers do not wish to have the
product checked, return the product without any delivery. Shipping or shipping
company does not accept any responsibility for the products you have signed and
checked without checking.
Only products with damage detection can be
exchanged or returned free of charge.