Eclectıa Isosprıng Membrane Repaır, Repaıred
Waterproofıng Product For Corrugated Membrane Repaırs, Joınts And Fıttıngs
It is used as local
waterproofing for the repair, repair and repair of all worn, worn, erupted,
cracked, eroded, UV-affected sun membranes. It is applied and used without removing,
disassembling the old membranes. It prevents water from the joints, bottom
edges and itself of the membranes and provides a healthy waterproofing. It
extends the life of the membranes to the maximum level and enables them to
become a newly made membrane.
It is a water-based,
water-insulating material that forms a non-elastic, elastic, waterproof layer
by drying with the thick film layer it forms on the surfaces it is applied by
applying. Forms a decorative coating. It has elasticity. Thanks to its special
formula, it does not retain dirt and maintains its original feature for many
Scope of application
It is used for the
repair and repair of all worn and worn membranes that are worn, worn, removed
from the joints, cracked, affected by the UV rays of the sun. Perepet corners
of membranes, chimney bottoms and is used in areas where the wall joins.
surfaces should be free of dust, dirt and oil and the surface should be dry.
Loose layers should be removed if any, small cracks and defects on the surface
should be repaired and corrected. Before application, horizontal and vertical
surfaces should be primed with “İsospring Insulation
Primer so that there is no open area. Then allow to dry for at least 2 hours. Isospring
membrane repair ”is ready
to use. The application can be done by brush, roller, or an appropriate
sprayer. After the primer, the surface is applied in two coats with an interval
of 4 hours and the process is finished. Avoid application in frost and extreme
heat. The waiting time between the coats is 4 hours and application should be
made between + 5 C and +35 C.
1 kg - 1.5 kg should
be used in 1 m2. It is recommended to apply double coat. It is applied with
brush and roller. Ready to be diluted with water or other substances. Consuming
more or less can lead to inefficiency and side effects in product performance.
Application surface, rain and water during and after the application,
mechanical impacts and so on. should be protected from all external factors for
Waiting time between
coats is 4 hours. These values are
given for 1 mm thickness at 20 ° C
during application should be between +5 ° C and +
35 ° C. These values can vary
depending on the ambient conditions.
Store in a cool, dry
place away from direct sunlight in its original sealed packages at +5 to +35 ° C. Keep
container closed when not in use. Protect from freezing. Shelf life is 24
As with all chemical
products, food products should not be in contact with skin, eyes and mouth
during handling and storage. During the application, work clothes, protective
gloves, goggles and masks which comply with occupational health rules should be
If swallowed by
accident, seek medical advice. Store out of reach of children.
20 kg - 3.5 kg - 1
kg in the plastic buckets
Green, red, black
(can be produced in desired colors)
Product Exchange And
When the product is
delivered from the cargo, the packages must be checked, the damaged package or
products should not be received, the signature should not be signed and the
cargo authority must determine the damage report.
If the couriers do
not wish to have the product checked, return the product without any delivery.
Shipping or shipping company does not accept any responsibility for the
products you have signed and checked without checking.
Only products with
damage detection can be exchanged or returned free of charge.