New Technologıes, Permanent Solutıons In Insulatıon Transparent Lıquıd, Mechanıcal Resıstant Glass Plated
İSOBOND Lıquıd Glass
New
Technologıes, Permanent Solutıons In Insulatıon Transparent Lıquıd, Mechanıcal
Resıstant Glass Plated
Product Features
Introductıon
isospring
LIQUID GLASS; Ceramic, marble, granite, tiles, porcelain, natural stone,
concrete etc. wood, galvanized sheet, aluminum etc. It is a two-component,
transparent and transparent waterproofing coating that can be easily applied on
surface coatings, has excellent adhesion, UV resistance, chemical and physical
resistance. It has high chemical and physical resistance. It is walkable,
durable and non-slip.
It
does not spoil the decorative appearance of the surface on which it is applied
as it provides waterproofing, and it is not as glassy and brittle. It is a
two-component product. It is not affected by outside weather conditions, does
not turn yellow, fade or get up in time. Especially in the solution of
insulation problems arising on floors such as balconies, terraces, bathrooms,
pools, it can be easily applied to the surface without damaging the image of
the existing coating and provides waterproofing. It is solvent based and has
two components. After drying, it creates a transparent, elastic, seamless,
joint-free layer.
SCOPE OF APPLICATION
Ceramic,
marble, granite, tiles, porcelain, natural stone, concrete, etc. .. wood,
screed, galvanized sheet, aluminum etc. .. surface coatings, stone coated
exterior facades, Glass, glass brick It is a product with a wide usage area in
ceramic, glass and mosaic covered ornamental pools. It helps prevent dusting on
absorbent surfaces.
APPLICATION INSTRUCTION
Surface
preparation: All kinds of oil, dust, dirt, rust and similar substances that may
prevent the liquid glass from sticking to the surface should be completely
cleaned between the liquid glass and the floor. If the paint is damaged and
swollen on old painted surfaces on which liquid glass will be applied, it
should be scraped completely. It should be free of debris, clean and dry. For a
good yield, surface cleaning should be done very well. The sanded surface provides
better mechanical properties for liquid glass application and helps the liquid
glass to adhere better to the surface. It should not be applied outdoors in
rainy weather. Method of application: Before the application, the two components
should be mixed thoroughly in the A component by adding all the B component in
the given proportions and weight. The two components can react to the desired reaction
only when it becomes a complete mixture. Mix life is on average 1 hour. The prepared
mixture is applied with a brush, roller or spray gun. The surface temperature
to be applied should be at least 5 ° C, Ambient temperature should be in the
range of 15-35 ° C, Humidity should not exceed 80%. Waiting time between layers
should be 24 - 48 hours / 20 ° C. For best performance, it should be applied in
2 or 3 layers.
CONSUMPTION /
0,15
-0,20 kg / m2 (single layer) is ready in 2 materials, it is not diluted with
water. It is used by mixing and mixing. Consumption more or less can lead to inefficiency
and side effects on product performance. Application surface, rain, water,
mechanical impacts etc. during and after the application. must be protected
from all external factors for 24 hours.
DRYING TIME
4
- 8 hours at 20 ° C may vary depending on the applied surface, application
fullness and moisture. Hardening Time 20 ° C 18 - 24 hours, (relative humidity
of the air should be less than 80%). Full cure reaction time; 7 days waiting
period between floors is 24 - 48 hours. It is 24 hours to fully dry, these
values may change according to the ambient conditions.
STORAGE / STORAGE
CONDITIONS
Store
in a cool, dry environment, free from sunlight, in an unopened original
package, between +5, +35 ° C and store. Keep the mouth of the package closed
when not in use. Protect from freezing. Shelf life is 24 months.
HEALTH SAFETY
As
with all chemical products, food products should not be in contact with the
skin, eyes and mouth during use and storage. During the application, work
clothes, protective gloves, glasses and mask should be used in accordance with
the occupational health and safety rules. If accidentally swallowed, consult a
doctor. It should be stored out of the reach of children.
PACKAGING SHAPE
A
Component 3.5 kg + B Component 0.5 kg (4 kg set Metal Box)
COLOR
Transparent,
Transparent
