Eclectia Acrylic Adhesive, Heat, Sound, Felt, Stropier Sheets Etc. The New
Generation Of Products Is Contact Acrylic Adhesive.
felt, stropier etc. kontak It is a water-based, special polymer based,
non-flammable, one component adhesive that provides the adhesion of the sheets
to different surfaces. It is a structurally flexible, plasticizer-free,
elastomeric adhesive that is highly resistant to different climatic conditions.
All kinds of
concrete, wood, metal, OSB, betopan,, gypsum board, ceramic, natural stone,
glass mosaic, marble and so on. surfaces; sound insulation plates, heat
insulation plates and heat insulation foams geotextile felt etc. provides very
strong adhesion of products such as.
application surfaces should be free of dust, dirt and oil and the surface
should be dry. Loose layers should be removed if any, small cracks and defects
on the surface should be repaired and corrected. Before application, horizontal
and vertical surfaces should be primed with ofix Isofix insulation primer üzere
so that there is no open area. Then allow to dry for at least 2 hours. Lect
Eclectia Heat, Sound, Felt Plates Adhesive ”should be applied on the surface to
be bonded with a roller or brush.
application is completed, heat or sound insulation boards or foam should be
glued with the help of hand and trowel. After the adhesion is completed, it
should be deaerated by pressing with a roller, trowel or gauge. Do not touch
the finished surface for 24 hours.
application in frost and extreme heat. The waiting time between the coats is 4
hours and application should be made between + 5 ° C and + 35 ° C.
0,3 - 1 Kg /
m² It is given for 1 mm thickness on the basis of application. It is applied
with roller. Ready to be diluted with water or other substances. Consuming more
or less can lead to inefficiency and side effects in product performance.
Application surface, rain and water during and after the application,
mechanical impacts and so on. should be protected from all external factors for
between coats is 4 hours. These values are given for 1 mm thickness at 20
temperature during application should be between +5 ° C and + 35 ° C.
These values can
vary depending on the ambient conditions.
Store in a
cool, dry place away from direct sunlight in its original sealed packages at +5
to +35 ° C. Keep
container closed when not in use. Protect from freezing. Shelf life is 24
As with all
chemical products, food products should not be in contact with skin, eyes and
mouth during handling and storage. During the application, work clothes,
protective gloves, goggles and masks which comply with occupational health
rules should be used.
by accident, seek medical advice. Store out of reach of children.
20 kg - 5 kg
-1 kg in the buckets
Light blue; White, (can be produced in desired colors)
Exchange And Return Conditions
product is delivered from the cargo, the packages must be checked, the damaged
package or products should not be received, the signature should not be signed
and the cargo officer must determine the damage report.
couriers do not wish to have the product checked, return the product without
any delivery. Shipping or shipping company does not accept responsibility for
the products you have signed and checked without checking.
with damage detection can be exchanged or returned free of charge.