Eclectia Isobasic Super Component Water Shutoff Is A Preffered Water
Insulation Product Product That Is Polymer Based, Mineral Additive And New
New Generation Technologies in Insulation, Permanent
Eclectia Isobasic Super Component Water Shutoff
Polymer Based, Mineral Additive Waterproofing
Specification and Promotion
cement-free acrylic polymer and special mineral doped structure with high
coefficient of friction, resistant to pedestrian traffic, water-based,
one-component special Quars added waterproofing material providing excellent
adherence and waterproofing. Insoluble in water after drying is not affected by
hot and cold, UV resistant is an extremely durable insulation coating.
Therefore, it is extremely suitable for use on concrete roofs, terraces,
walking paths and areas. If required, all kinds of ceramic marble and and
Coating can be done.
terraces, roofs and balconies, wet areas such as bathrooms, wc, kitchens, metal
and wood surfaces, foundation and curtain concretes, sheet and
corrugated-corrugated roofing sheets, exterior of buildings, on old problematic
insulations, asphalt and concrete floors used for insulation of other details.
It protects concrete and iron accessories by preventing corrosion.
surfaces should be free of dust, dirt and oil and the surface should be dry.
Loose layers should be removed if any, small cracks and defects on the surface
should be repaired and corrected. Before application, horizontal and vertical
surfaces should be primed with ofix Isofix insulation primer so that there is
no open area. Then allow to dry for at least 2 hours. Isobasic super component
waterproofing is applied in two coats by brush after mixed 3-4 minutes. The
first layer should be applied to the west direction. After 4 hours, the second
layer should be applied to the north direction. Avoid application in frost and
extreme heat. Waiting time between coats is 4 hours. Care should be taken to
apply between +5 C and + 35 C.
Wastage / Consumption
1kg / m2 for 1 mm
thickness; It is applied with 1-1,5 kg brush and roller in m2 with double coat
application. Ready to be diluted with water or other substances. Consuming more
or less can lead to inefficiency and side effects in product performance.
Application surface, rain and water during and after the application,
mechanical impacts and so on. should be protected from all external factors for
Waiting time between
coats is 4 hours. These values are given for 1 mm thickness at 20 ° C.
during application should be between +5 ° C and +
35 ° C.
These values can
vary depending on the ambient conditions.
Store in a cool, dry
place away from direct sunlight in its original sealed packages at +5 to +35 ° C. Keep
container closed when not in use. Protect from freezing. Shelf life is 24
As with all chemical
products, food products should not be in contact with skin, eyes and mouth
during handling and storage. During the application, work clothes, protective
gloves, goggles and masks which comply with occupational health rules should be
If swallowed by
accident, seek medical advice. Store out of reach of children.
18 kg - 5 kg pe buckets
resistant; Gray, red, green (can be produced in desired colors)
Product Exchange And
When the product is
delivered from the cargo, the packages must be checked, the damaged package or
products should not be received, the signature should not be signed and the
cargo authority must determine the damage report.
If the couriers do
not wish to have the product checked, please return the product without any
delivery. Shipping or shipping company does not accept any responsibility for
the products you have signed and checked without checking.
Only products with damage detection can be exc