Ready To Use Acrylic Polymer
Adhesive With Heavy Load Carriage.
Product Features And
Neopar / eps plates, jambs, foam, stone,
floor wiping, windowsill, marble, vitrified materials or metal, cladding
elements, is a product produced for bonding to the surface. Different materials;
concrete, gas, metal, wood, plaster etc. It is a multi-purpose, practical,
multi-purpose adhesive with high adherence, cement, sand-free, heat and cold
resistance, no brittleness, high tensile adhesion strength (1N / mm2), which
can be used without the need of apparatus such as dowels and bolts.
It is used for bonding and mounting on all
kinds of concrete, wood, metal, aerated concrete, gypsum board, betopan,
ceramic, artificial and natural stone, glass mosaic and marble surfaces.
The application surfaces should be free of
dust, dirt and oil and the surface should be dry. Any loose layers should be
As it is a multi-purpose adhesive, the
adhesive should be combined to apply pressure for the parts to be bonded on one
In the bonding of polystyrene plates such
as eps, a punctuation or clustering system is applied to the surface without
The metal surfaces must be clean and free
For the installation of heavy jambs coated
with surface, the adhesive plaster is applied to the surface as punctuation.
However, after 10 minutes at 20ºC, the bonding process takes place to prevent slippage
due to weight. As the temperature increases, the waiting time is shortened and
decreases. The application lengths are preferably steel trowel. After the
application, water is used for the cleaning of the instruments.
Consumption / Consumption
There is 0.20 - 0.75 kg / m2 consumption
for eps plates at 1 m2. Consumption varies due to usage area is very wide,
usage group varies according to plastering
Ready to be diluted with water or other
substances. Consuming more or less can lead to inefficiency and side effects in
product performance. Application surface, rain and water during and after the
application, mechanical impacts and so on. must be protected from all external
factors for 24 hours
Application at 20 ºC is 2 hours. Ambient temperature during application
should be between +5 ° C and +35 ° C. These values can vary
depending on the ambient conditions.
Store in a cool, dry place away from
direct sunlight in its original sealed packages at +5 to +35 ° C. Keep
container closed when not in use. Protect from freezing. Shelf life is 24
As with all chemical products, food
products should not be in contact with skin, eyes and mouth during handling and
storage. During the application, work clothes, protective gloves, goggles and
masks which comply with occupational health rules should be used.
If swallowed by accident, seek medical
advice. Store out of reach of children.
18 kg - 3.5 kg - 1 kg in the plastic
Standard white, (can be produced in
Product Exchange And Return
When the product is delivered from the
cargo, the packages must be checked, the damaged package or products should not
be received, the signature should not be signed and the cargo officer must
determine the damage report.
If the couriers do not wish to have the
product checked, return the product without any delivery. Shipping or shipping
company does not accept responsibility for the products you have signed and
checked without checking.
Only products with damage detection can be
exchanged or returned free of charge.