Cement-Free, Sandless, Dowelless, Flexible, Elastic, Light, Durable Long Lasting, Water Based Ready To Heat Insulation Plaster
Cement-Free, Sandless, Dowelless,
Flexible, Elastic, Light, Durable Long Lasting, Water Based Ready To Heat
Insulation Plaster
Product Features And Promotion
It is applied on concrete, wood and all kinds of mineral origin surfaces. It can provide thermal and water insulation on the exterior walls together. provides ready insulation plaster.
It protects against water and heat permeability by wrapping the structures like shell without leaving any spaces in the structures and at the same time it allows the passage of water vapor when it has a breathing effect. It is 4 times lighter than other cement based jacketing and thermal insulation systems and does not put any load on your buildings.
As well as
providing water insulation, it provides heat insulation up to 30% when applied
alone thanks to the air gaps in it. When applied together with EPS plates, it
provides up to 60% heat insulation on the facade and in your living spaces.
Scope of application
On concrete and
wooden surfaces, plastered surfaces, brick and aerated concrete, painted
surfaces, osb and betopan; It is applied and used for thermal insulation on
neopar / eps plates on glass and mosaic surfaces.
Application Instruction
The application
surfaces should be free of dust, dirt and oil and the surface should be dry.
Loose layers should be removed if any, small cracks and defects on the surface
should be repaired and corrected. Before application, horizontal and vertical
surfaces should be primed with O ISOFIX INSULATION PRIMER so that there is no open
area. Then allow to dry for at least 2 hours.
Application Details on
Areas such as Wall, Plaster and Mosaic
First of all, the
surface should be cleaned from residues preventing adhesion.
isoplaster interior
and exterior heat insulation plaster is applied as a first layer thin layer
with a steel trowel by pulling with a steel trowel as a peeling without trying
to form a layer. It is important to note that the product is drawn from bottom
to top or from top to bottom in the first layer as a scraper without trying to
form a thin layer. The second coat should not be started before the first coat
is completely dry.
After the first
layer is completely dry, the product should be drawn like plaster, so that the
second layer surface is formed. After the application, the desired paint is
made based on acrylic. If İsten isoshield
waterproof paint ”is used
as the paint on the applied surfaces, 100% waterproofing is provided.
Application Details on
Eps / Neopar Foams Etc. Areas
Ofix Isofix
multi-purpose universal adhesive “is used for bonding
heat insulation foams to prepared surfaces such as walls, plaster, mosaic etc.
(such as eps / neopar etc.).
Oper Isoper elastic
filling and repair mortar “is used to prevent
heat leakage at the joints of foams adhered to areas such as walls, plaster,
mosaic etc.
“Isoplaster interior
and exterior thermal insulation plaster ile is applied by pulling the first
layer of thin layer with steel trowel without trying to form a layer. It is
important to note that the product is drawn from bottom to top or from top to
bottom in the first layer as thin and without stripping. The second coat should
not be started before the first coat is completely dry. After the first layer
is completely dry, the product should be drawn like plaster, so that the second
layer surface is formed.
After the
application, the desired paint is made based on acrylic. If it is desired, if
osh isoshield waterproof paint boya is used as the paint on the applied
surfaces, 100% waterproofing is provided.
In applications
After the first coat has dried, the second coat should be applied. Avoid
application in frost and extreme heat. The waiting time between the coats is 4
hours and application should be made between + 5 C and +35 C.
Consumption
3.75 - 4 kg / m² (at least
3 mm & 4 mm thickness). Ready to be diluted with water or other substances.
Consuming more or less can lead to inefficiency and side effects on product
performance. Application surface, rain and water during and after the
application, mechanical impacts and so on. should be protected from all
external factors for 24 hours.
Drying Time
Application at 20 ºC is 4 hours.
Ambient temperature during application should be between +5 ° C and
+35 ° C. These values can vary
depending on the ambient conditions.
Storage Conditions
Store in a cool, dry
place away from direct sunlight in its original sealed packages at +5 to +35 ° C. Keep
container closed when not in use. Protect from freezing. Shelf life is 12
months.
Health Safety
As with all chemical
products, food products should not be in contact with skin, eyes and mouth
during handling and storage. During the application, work clothes, protective
gloves, goggles and masks which comply with occupational health rules should be
used.
If swallowed by accident,
seek medical advice. Store out of reach of children.
Packaging shape
15 kg - in pe buckets
Color
Standard white, (can
be produced in desired colors)
Product Exchange And
Return Conditions:
When the product is
delivered from the cargo, the packages must be checked, the damaged package or
products should not be received, the signature should not be signed and the
cargo officer must determine the damage report.
If the couriers do
not wish to have the product checked, return the product without any delivery.
Shipping or shipping company does not accept responsibility for the products
you have signed and checked without checking.
Only products with
damage detection can be exchanged or returned free of charge.
