Eclectia Isopurous Tile Surface Builder Smoothing Is A Ceramic Primer Produced With New Generation Technologies.
Eclectia Isopurous Tile Surface Builder Smoothing Is A Ceramic Primer Produced With New Generation Technologies.
Product Features Introduction
Acrylic polymer based, single component, glassy surfaces such as ceramics, mosaics are used to ensure adherence and surface preparation before bonding of ceramic and coating materials to be applied on it. Suitable for indoor and outdoor, horizontal and vertical surfaces. Quartz granular plaster primer. Water-based, odorless, can be safely used indoors.
Scope of application
It is used for bonding ceramic and coating materials to be applied on interior and exterior spaces, horizontal and vertical applications, and glassy surfaces such as ceramic and mosaic. Ceramics, tiles, mosaics and so on. It forms a tooth to the surfaces thanks to its Quasr structure and is used to bond the other material to be applied.
Application Instruction
The application surfaces should be free of dust, dirt
and oil and the surface should be dry. Loose layers should be removed if any,
small cracks and defects on the surface should be repaired and corrected. The
product should be used within the pot life. During the application, the
products that have reached the end of the pot life should not be used.
ISOPUR Ceramic Topcoat Primer should be mixed with a mixer until homogenous before use. 3-4 min. After mixing, apply in two coats by brush. Avoid application in frost and extreme heat. Waiting time between coats is 4 hours. Care should be taken to apply between +5 C and + 35 C.
Consumption /
250 - 500 g / m2 (Depends on the absorbency and
roughness of the application surface); It is applied with 0.2 mm -0.4 mm roll
per m2 on the basis of application. Stir the product at regular intervals to
prevent the Quartz aggregate from settling down during operation. Ready to be
diluted with water or other substances. Consuming more or less can lead to
inefficiency and side effects in product performance. Application surface, rain
and water during and after the application, mechanical impacts and so on.
should be protected from all external factors for 24 hours.
Drying Time
Waiting time between coats is 4 hours. These values are given for 1 mm thickness at 20 ° C.
Ambient temperature during application should be between +5 ° C and + 35 ° C.
These values can vary depending on the ambient
conditions.
Storage Conditions
Store in a cool, dry place away from direct sunlight in its original sealed packages at +5 to +35 ° C. Keep container closed when not in use. Protect from freezing. Shelf life is 12 months.
Health Safety
As with all chemical products, food products should
not be in contact with skin, eyes and mouth during handling and storage. During
the application, work clothes, protective gloves, goggles and masks which
comply with occupational health rules should be used.
If swallowed by accident, seek medical advice. Store
out of reach of children.
Packaging shape
1 kg - 5 kg pe buckets
Color
Standard, light red
Product Exchange And Return Conditions:
When the product is delivered from the cargo, the packages must be checked, the damaged package or products should not be received, the signature should not be signed and the cargo authority must determine the damage report.
If the couriers do not wish to have the product checked, return the product without any delivery. Shipping or shipping company does not accept any responsibility for the products you have signed and checked without checking.
Only products with damage detection can be exchanged
or returned free of charge.
