Eclectia Isopure Gross Concrete Primer

Quasrl Surface Creating And Proofing Primer, New Generation Technology Is An Insulation Product.


Quasrl Surface Creating And Proofing Primer, New Generation Technology Is An Insulation Product. 

Product Features Introduction

For acrylic polymer based, one component, gross concrete surfaces; It is a quartz granular plaster primer that increases the adherence and working time of the surface before the application of cement or gypsum based plasters. Water-based, odorless, can be safely used indoors. 

Scope of application

It is used as an adherence enhancing primer before cement or gypsum based plaster mortars in interior and exterior spaces, horizontal and vertical applications, as an adherence enhancing primer prior to ceiling plasters, to increase adherence. It is used as adherence enhancer under gypsum, lime and cement based mortars. 

Application Instruction

The application surfaces should be free of dust, dirt and oil and the surface should be dry. Loose layers should be removed if any, small cracks and defects on the surface should be repaired and corrected. The product should be used within the pot life. During the application, the products that have reached the end of the pot life should not be used. 

Isopur Gross Concrete Primer is mixed with a mixer for 3-4 min. After mixing, apply in two coats by brush. Avoid application in frost and extreme heat. Waiting time between coats is 4 hours. Care should be taken to apply between +5 C and + 35 C. 

Consumption

150 - 250 g / m2 (depending on the absorbency and roughness of the application surface); It is applied with 0.2 mm -0.4 mm roll per m2 on the basis of application. Stir the product at regular intervals to prevent the Quartz aggregate from settling down during operation. Ready to be diluted with water or other substances. Consuming more or less can lead to inefficiency and side effects in product performance. Application surface, rain and water during and after the application, mechanical impacts and so on. should be protected from all external factors for 24 hours. 

Drying Time

Waiting time between coats is 4 hours. These values ​​are given for 1 mm thickness at 20 ° C 

Ambient temperature during application should be between +5 ° C and + 35 ° C. 

These values ​​can vary depending on the ambient conditions. 

Storage Conditions

Store in a cool, dry place away from direct sunlight in its original sealed packages at +5 to +35 ° C. Keep container closed when not in use. Protect from freezing. Shelf life is 12 months. 

Health Safety

As with all chemical products, food products should not be in contact with skin, eyes and mouth during handling and storage. During the application, work clothes, protective gloves, goggles and masks which comply with occupational health rules should be used.

If swallowed by accident, seek medical advice. Store out of reach of children. 

Packaging shape

In 12 kg - 5 kg pe buckets 

Color

Standard, light red 

Product Exchange And Return Conditions:

When the product is delivered from the cargo, the packages must be checked, the damaged package or products should not be received, the signature should not be signed and the cargo authority must determine the damage report. 

If the couriers do not wish to have the product checked, return the product without any delivery. Shipping or shipping company does not accept any responsibility for the products you have signed and checked without checking. 

Only products with damage detection can be exchanged or returned free of charge.




n11

hepsiburada

gittigidiyor

trendyol

epttavm