Eclectia - Isospring 1/7 Binder Concentrated Lining

Eclectia Binder Is A Preferred Insulation Primer For Water Based Acrylic Emulsion Based Concentrated And New Generation Technologies.

Eclectia Binder Is A Preferred Insulation Primer For Water Based Acrylic Emulsion Based Concentrated And New Generation Technologies. 

Product Features Introduction

Acrylic co-polymer based, water based, one component, transparent, suitable for use on interior and exterior surfaces, multifunctional concentrated primer. It affects the texture of every kind of mineral origin and porous infrastructure and penetrates the surface to which it is applied and reinforces the reinforcement. It eliminates the sanding or chalking on the surface, the surface on which it is applied oil, dirt, dust, etc. substances. It is used for strengthening of dusty, crumbly mineral based surfaces. It is highly binder and alkali resistant, water impermeable. It also reduces paint consumption when applied to raw plaster and gypsum plasters.

Scope of application

It can be applied as a primer on conventional plastered, gypsum, satin gypsum, gypsum board, mineral based raw wall surfaces to be painted for the first time, old stained interior-exterior surfaces which have lost their color, will be discolored or will be changed for decorative purposes.

Application Instruction

Surface to be applied; dust, dirt, oil etc. The surface must be clean and dry. It is applied by thinning with 7 times its volume with water or by brush or roller, absorbing it in one layer. After a minimum drying time of 4 hours, paint is applied. It helps you to achieve a healthy ground. Application areas should be between +5 C and +30 C. It should be mixed before use.


Although it is variable according to the absorbency of the surface, it has a consumption of approximately 0,15 - 0,300 kg / m2 in approximately 1 m2 single floor on concrete and plaster surfaces. It is applied with brush and roller.

It should be diluted with water 7 times its volume. Consuming more or less can lead to inefficiency and side effects in product performance. Application surface, rain and water during and after the application, mechanical impacts and so on. should be protected from all external factors for 24 hours.

Drying Time

Touch drying time is 4 hours. Ambient temperature during application should be between +5 ° C and + 35 ° C. Full drying can vary according to ambient conditions for 24 hours.

Storage Conditions

Store in a cool, dry place away from direct sunlight in its original sealed packages at +5 to +35 ° C. Keep container closed when not in use. Protect from freezing. Shelf life is 12 months.

Health Safety

As with all chemical products, food products should not be in contact with skin, eyes and mouth during handling and storage. During the application, work clothes, protective gloves, goggles and masks which comply with occupational health rules should be used.

If swallowed by accident, seek medical advice. Store out of reach of children.

Packaging shape

15 kg - 2.5 kg -1 kg in the buckets



Product Exchange And Return Conditions: 

When the product is delivered from the cargo, the packages must be checked, the damaged package or products should not be received, the signature should not be signed and the cargo authority must determine the damage report.

If the couriers do not wish to have the product checked, return the product without any delivery. Shipping or shipping company does not accept any responsibility for the products you have signed and checked without checking.

Only products with damage detection can be exchanged or returned free of charge.