Eclectia İsospring Ecl Gray Water Cutter Is A Unit Component, Acrylic Based, Uv Resistant,
Elastic Water Insulation Product With New Generation Production Technologies
Product Features And Promotion
Pure acrylic based,
acrylic based high elasticity, easily applied to all kinds of surfaces, highly
resistant to UV rays suitable for different climatic conditions, structurally,
flexible, elastomeric resistant surface preventing bacteria formation, wide
usage area, non-cracking is the new generation waterproofing product ideal for
When exposed to flame,
it extinguishes automatically without spreading flame. Thanks to this feature;
Fits the definition of ret fire retardant coatings..
Scope of application
terraces, roofs and balconies, wet areas such as bathrooms, wc, kitchens, metal
and wood surfaces, foundation and curtain concretes, bricks, tiles, briquettes,
ytong, gas concrete, galvanized, trapezoidal sheet and corrugated-corrugated
roofing sheets, It is used on exterior facades of buildings, on old problematic
insulations and on other details on asphalt and concrete floors. It protects
concrete and iron accessories by preventing corrosion.
surfaces should be free of dust, dirt and oil and the surface should be dry.
Loose layers should be removed if any, small cracks and defects on the surface
should be repaired and corrected. Before application, horizontal and vertical
surfaces should be primed with ofix Isofix waterproofing primer so that
there is no open area. Then allow to dry for at least 2 hours. “Isospring
ecl water breaker 1st layer should be applied to the west direction. After 4
hours, 2 layers should be applied to the north direction. Avoid application in
frost and extreme heat. It should be strengthened with ﬁle at
vertical and horizontal intersections for high-foot applications where puddles
are required to be walked on. It is recommended that surfaces exposed to
overload pressure traffic be coated with a protective coating material such as
screed and ceramic.
1kg / m2 for 1 mm
thickness; It is applied with 1,5 -2 kg roll in m2 on double layer basis. Ready
to be diluted with water or other substances. Consuming more or less can lead
to inefficiency and side effects in product performance. Application surface,
rain and water during and after the application, mechanical impacts and so on.
should be protected from all external factors for 24 hours.
Waiting time between
coats is 4 hours. These values are given for 1 mm thickness at 20 ° C
during application should be between +5 ° C and + 35
Full drying is 24
hours, these values may vary according to ambient conditions.
Store in a cool, dry
place away from direct sunlight in its original sealed packages at +5 to +35 ° C. Keep
container closed when not in use. Protect from freezing. Shelf life is 24
As with all chemical
products, food products should not be in contact with skin, eyes and mouth
during handling and storage. During the application, work clothes, protective
gloves, goggles and masks which comply with occupational health rules should be
If swallowed by
accident, seek medical advice. Store out of reach of children.
kg - 5 kg - in pe buckets
Standard UV resistant;
Gray (can be produced in desired colors)
Product Exchange And Return Conditions:
When the product is
delivered from the cargo, the packages must be checked, the damaged package or
products should not be received, the signature should not be signed and the
cargo authority must determine the damage report.
If the couriers do not
wish to have the product checked, return the product without any delivery.
Shipping or shipping company does not accept any responsibility for the
products you have signed and checked without checking.
Only products with
damage detection can be exchanged or returned free of charge.