It Is A Product That
Is Resistant To Mold And Moisture Formation And That Has High Demand As Ceiling
And Wall Insulation Material Produced With Acrylic Odor And New Generation
Product Features Introduction
Mold is easily formed on damp and cold walls and is seen as black or
dark yellow spots. Particularly due to health problems, it should be
permanently removed quickly. Isospring Mold And Moisture Inhibitor; It is an
interior insulation material with special formulation resistant to mold and
moisture formation. Suitable for wall and ceiling applications. It is a
high-coverage, erasable, high-quality and ready-to-use waterproofing. It is
produced in white color. In order to adapt to the existing wall paint, the
desired paint application can be done on it.
Scope of application
It is used as a mold resistant paint on all walls and ceilings of the
building. It should be preferred as ceiling and wall paint especially in areas
that are constantly humid such as indoor pool, steam room, Turkish bath.
Suitable for use on walls and ceilings of rooms under ground such as garages
and basements. It protects concrete and iron accessories by preventing
The application surfaces should be free of dust, dirt and oil and the
surface should be dry. Loose layers should be removed if any, small cracks and
defects on the surface should be repaired and corrected. Application is done in
2 layers with roller. If a color other than white is desired, water-based paint
of the desired color is applied. Application should be done in thin layers (if thick
application, cracking may occur). Avoid application in frost and extreme heat.
Waiting time between coats is 4 hours. Care should be taken to apply between +5
C and + 35 C.
Consumption / Consumption
0.250 - 0.500 kg / m2 for the thickness of 1 mm; It is applied by roller
on double coat basis. Ready to be diluted with water or other substances.
Consuming more or less can lead to inefficiency and side effects in product
performance. Application surface, rain and water during and after the
application, mechanical impacts and so on. should be protected from all
external factors for 24 hours.
Waiting time between coats is 4 hours. These values are given for 1 mm thickness at 20 ° C
Ambient temperature during application should be between +5 ° C and + 35 ° C.
These values can vary
depending on the ambient conditions.
Store in a cool, dry place away from direct sunlight in its original
sealed packages at +5 to +35 ° C. Keep
container closed when not in use. Protect from freezing. Shelf life is 24
As with all chemical products, food products should not be in contact
with skin, eyes and mouth during handling and storage. During the application,
work clothes, protective gloves, goggles and masks which comply with
occupational health rules should be used.
If swallowed by accident, seek medical advice. Store out of reach of
In 3.5 kg - 1 kg pe
Product Exchange And Return Conditions:
When the product is delivered from the cargo, the packages must be
checked, the damaged package or products should not be received, the signature
should not be signed and the cargo authority must determine the damage report.
If the couriers do not wish to have the product checked, return the
product without any delivery. Shipping or shipping company does not accept any
responsibility for the products you have signed and checked without checking.
Only products with damage detection can be exchanged or returned free of