Eclectıa Isosprıng Water Shutoff Is A Single Component, Acrylic Based, Uv Resistant,
Elastic And New Generation Waterproofing Product Which Is Produced And
Preferred In Its Class.
Product Features And Promotion
Pure acrylic based, acrylic based high elasticity,
easily applied to all kinds of surfaces, highly resistant to UV rays suitable
for different climatic conditions, structurally, flexible, elastomeric
resistant surface preventing bacteria formation, wide usage area, non-cracking
is the new generation waterproofing product ideal for waterproofing.
When exposed to flame, it extinguishes spontaneously
without spreading flame. Thanks to this feature; Fits the definition of ret
fire retardant coatings..
Scope Of Application
Waterproofing of terraces, roofs and balconies, wet
areas such as bathrooms, wc, kitchens, metal and wood surfaces, foundation and
curtain concretes, bricks, tiles, briquettes, ytong, gas concrete, galvanized,
trapezoidal sheet and corrugated-corrugated roofing sheets, It is used on
exterior facades of buildings, on old problematic insulations and on other
details on asphalt and concrete floors. It protects concrete and iron
accessories by preventing corrosion.
The application surfaces should be free of dust, dirt
and oil and the surface should be dry. Loose layers should be removed if any,
small cracks and defects on the surface should be repaired and corrected.
Before application, horizontal and vertical surfaces should be primed with ofix
Isofix Waterproofing Primer so that there is no open area. Then allow to dry for
at least 2 hours. ’Os Isospring water breaker malı
1st layer should be applied to the west
direction. After 4 hours, 2 layers should be applied to the north direction.
Avoid application in frost and extreme heat. It should be strengthened with ﬁle at vertical and horizontal intersections for
high-foot applications where puddles are required to be walked on. It is
recommended that surfaces exposed to overload pressure traffic be coated with a
protective coating material such as screed and ceramic.
1kg / m2 for 1 mm thickness; It is applied with 1,5 -2
kg roll in m2 on double layer basis. Ready to be diluted with water or other
substances. Consuming more or less can lead to inefficiency and side effects in
product performance. Application surface, rain and water during and after the
application, mechanical impacts and so on. should be protected from all
external factors for 24 hours.
Waiting time between coats is 4 hours. These values are given for 1 mm thickness at 20 °
Ambient temperature during application should be
between +5 ° C and + 35 ° C.
Full drying is 24 hours, these values may vary according to ambient conditions.
Store in a cool, dry place away from direct sunlight
in its original sealed packages at +5 to +35 ° C. Keep
container closed when not in use. Protect from freezing. Shelf life is 24
As with all chemical products, food products should
not be in contact with skin, eyes and mouth during handling and storage. During
the application, work clothes, protective gloves, goggles and masks which
comply with occupational health rules should be used.
If swallowed by accident, seek medical advice. Store
out of reach of children.
20 kg - 5 kg - 1 kg in PE buckets
Standard UV resistant; White, gray (can be produced in
Product Exchange And Return Conditions
When the product is delivered from the cargo, the
packages must be checked, the damaged package or products should not be
received, the signature should not be signed and the cargo officer must
determine the damage report.
If the couriers do not wish to have the product
checked, return the product without any delivery. Shipping or shipping company
does not accept responsibility for the products you have signed and checked
Only products with damage detection can be exchanged
or returned free of charge.