New Technologies And Permanent Solutions In Adhesives Isobond Activated Super Japanese
NEW TECHNOLOGIES AND PERMANENT
SOLUTIONS IN ADHESIVES
ISOBOND ACTIVATED SUPER JAPANESE
ADHESIVE
Mdf kit (200 ml +50 gr)
PRODUCT FEATURES AND INTRODUCTION
Super Japanese adhesive with isobond activator;
It is a two-component fast adhesive used for bonding wooden profiles, mdf,
rubber, chipboard plastic and rubber bonding, repairing and fixing wooden
parts. The activator prevents the adhesive from being absorbed by the surface,
increasing the adhesion strength and accelerating the adhesion. It has high joining
power. Since it does not flow from the surface it is applied, it can be used
easily on vertical surfaces.
SCOPE OF APPLICATION
It is used for bonding wooden profiles, MDF,
rubber, chipboard plastic and rubber bonding, repairing and fixing wooden
parts. It is ideal for bonding difficult parts, even on rough and porous
surfaces, when they do not have the property absorbed by the surface.
APPLICATION INSTRUCTION
The surfaces to be adhered must be dry, clean
and free from dust and oil. Tighten the activator upright 20 cm from the
surface, wait 3 seconds, apply the isobond fast adhesive on the same surface.
Bring the surfaces together takes place at the time of adhesion.
CONSUMPTION
It is ready to be diluted with water or other
substances. Consumption more or less can lead to inefficiency and side effects
on product performance. The applied surface, mechanical impacts during and
after the application, etc. be protected from all external factors.
DRYING TIME
Touch dry time is 5-10 seconds. Ambient
temperature should be between +5 C and + 35 ° C during application.
SHELF LIFE / STORAGE CONDITIONS
It is suitable for use for 12 months from the
date of production if it is stored and stored between +5, +25 ° C in its
original sealed packages in dry cool environments without direct sunlight. Keep
the mouth of the package closed when not in use. Protect from frost and direct
sunlight. It should be kept away from strong heat and light sources. Should not
be thrown into the fire
HEALTH SAFETY
As with all chemical products, food products
should not be in contact with the skin, eyes and mouth during use and storage.
During the application, work clothes, protective gloves, glasses and mask
should be used in accordance with the occupational health and safety rules. If
accidentally swallowed, consult a doctor. It should be stored out of the reach
of children. Activator is flammable, do not throw into fire, do not breathe,
activator box is pressurized, do not crush, do not pierce, protect from direct
sunlight. It should be kept away from strong heat and light sources. It should
not be thrown into fire and inhaled.
PACKAGING SHAPE
Activator & Adhesive 200ml +
50gr.
Pieces in a box: 24
COLOR
Colorless liquid / gel
