Spray Polyurethane Application

Spray Polyurethane Applıcatıon Is Applıed Lıquıd To The Surface Wıth A Hıgh Pressure Machıne And Needs A Very Good Technıcal Knowledge And Professıonal Experıence To Obtaın The Best Foam.


Spray Polyurethane Applıcatıon Is Applıed Lıquıd To The Surface Wıth A Hıgh Pressure Machıne And Needs A Very Good Technıcal Knowledge And Professıonal Experıence To Obtaın The Best Foam. 

ECLECTIA SPRAY POLYURETHANE foam is an excellent thermal insulation material applied to the surface by spray application method with the help of high-pressure machine equipment and 30-40 times of its volume within a few seconds and becomes foam. The application of spray polyurethane foam is carried out by means of a high-pressure machine and requires very good technical knowledge and experience to obtain the best foam. 

Each cell in the liquid polyurethane foam applied expands by 30-40 times its volume in 1-2 seconds in the area where it is settled, without thermal insulation (no thermal bridges) and other thermal insulation thanks to its very low thermal insulation value (DIN52616 ^ = 0,020-0,022 W / Mk) It creates a polyurethane foam which provides excellent thermal insulation and is more effective than the materials. 

Insulated Heat Insulation 

Fast Drying

Up to 50% Energy Savings 

Easy to Apply to All Areas 

PRODUCT DESCRIPTION: 

The demand for more durable, durable, more energy-saving and low-maintenance materials in the insulation industry is increasing day by day. 

ever increasing use in recent years and one of the polyurethane type that can be used to isolate all kinds of buildings at Eclectica Spray Polyurethane Despite being a relatively new technology for foam are the Turkey market up to the roof from the ground in the construction sector at every point, industrial roofs, storage tanks, cold storage, food and animals shelters. The application of Spray Polyurethane Foam, which has been known and used in developed countries for nearly 40 years, has gradually started to be recognized in our country. The use of insulation in multi-storey buildings (sheathing), thanks to the many advantages described below, this field will provide a very short time.

Eclectia Spray Polyurethane Foam (thermal insulation) What is it? 

It is an excellent thermal insulation material applied to the surface as a liquid by spraying with the help of high-pressure machine equipment, which becomes 30-40 times its volume in a few seconds and becomes foam. 

Each cell in the applied liquid material expands by 30-40 times its own volume within 1-2 seconds and additional heat (no thermal bridge is formed) and very low thermal insulation value (DIN52616 λ = 0,020-0,022 W / mK.) It creates a foam that provides excellent thermal insulation, more effective than insulation materials. The material applied by spraying to the surface under high pressure forms an insulating cover at the points where the surface is applied, with the ability to easily access the column-beam recesses and protrusions and to eliminate the thermal bridges with the continuous coating ability, and even to cover the horizontal and vertical pinholes on the whole surface. The application is quick and effortless. 

It provides thermal insulation covering of 500-1.000 m² per day. It saves material transportation and storage, labor costs and time. 

The application of SPF is done by a high pressure machine and a very good technical knowledge and experience is needed to obtain the best foam. 

Eclectia Spray Polyurethane (Thermal Insulation Foam) Application 

With Eclectia Spray Polyurethane Foam, the application of thermal insulation of living spaces is fast, effective and economical 

Thermal insulation application with Spray Polyurethane Foam; It is in the form of a specially equipped machine and 2 component liquid material in the mobile isolation vehicle, which is transported to the application area by means of a heated hose and applied as a spray on the application surface with a special spray gun under high pressure.

Because the reaction of the foam applied as a spray is very fast (1-2 seconds), it can be applied easily on all kinds of difficult surfaces and the material does not leave itself down. The foam, which dries completely in 1-2 minutes, becomes hard.

An ideal application is done in 3 or 4 layers. The foam thickness for each layer is adjusted to be approximately 1 cm. This thickness is sufficient to have a good dimensional stability of the foam.

Eclectia Spray Polyurethane Foam covers the first solid surface in a thin layer. When it is understood that this layer is completely dry by touch, the application continues layer by layer until it reaches the final thickness. 

Eclectia Spray Polyurethane Foam is applied to the surface form is insignificant. Regardless of the surface form, it takes the surface form without the need of any adhesive and mechanical fixation and adheres completely by eliminating the heat bridges with its continuous coating ability. Since it has very strong adhesion, it is not affected by impact, vibration, tectonic movements and vibrations. It is flexible, works with the structure. The life of the adhering foam is equivalent to that of the building. There is no gap between the applied foam and the surface. Water vapor permeability allows the surface to breathe, protects the area from corrosion and extends its life. It does not deteriorate in contact with water and does not decompose from where it is applied. Resistant to acid, base and salty environments. It does not contain bacteria and pests, does not smell, does not rot, is long-lasting and environmentally friendly.

Eclectia Spray Polyurethane (thermal insulation Foam) Advantages

It is the best known thermal insulation material. The application is extremely simple. Enables maximum insulation at minimum cost. Roof insulation, exterior cladding (jacketing), pipe and tank insulation, cold storage, freezers, climate controlled buildings (mushroom farms, chicken farms), tanks and warehouses are some of the application areas. There are many reasons why spray polyurethane foam thermal insulation technique is very popular, especially in developed and developing countries. Besides providing excellent thermal insulation, it has many advantages. Each cell in the applied liquid material expands by 30-40 times its own volume within 1-2 seconds in the area where it is settled. forms a foam that provides thermal insulation. The material applied by spraying on any surface to which it is applied under high pressure, the wall-chimney bottoms to which it is applied, the ability to easily reach the recesses and protrusions at the points of detail, form an additional non-surface (monolithic) insulation covering where even the horizontal and vertical pinhole is covered. The application is quick and effortless. It provides thermal insulation covering of 750-1.500 m² area per day. It saves material transportation and storage, labor costs and time. Thanks to its very fast reaction (1-2 seconds), it can be applied to any hard surface easily and the material does not let itself down. The foam, which dries completely in 1-2 minutes, becomes hard. An ideal application is done in 3 or 4 coats. The first layer of foam covers the surface in a thin layer. When it is understood that this layer is completely dry by touch, the application continues layer by layer until it reaches the final thickness. The foam thickness for each layer is adjusted to be approximately 1 cm. This thickness is sufficient to have a good dimensional stability of the foam. The surface form on which the Spray Polyurethane Foam is applied is insignificant. Regardless of the surface form, it takes the surface form without the need of any adhesive and mechanical fixation and adheres by eliminating the heat bridges with its continuous coating ability. As it has very strong adhesion, it is not affected by shocks, vibrations and vibrations. It is flexible, works with the structure. The life of the adhering foam is equivalent to that of the building. 

There is no gap between the applied foam and the surface. Water vapor permeability allows the surface to breathe, protects the area from corrosion and extends its life. It does not deteriorate in contact with water and does not decompose from where it is applied. Resistant to acid, base and salty environments. It does not contain bacteria and pests, does not smell, does not rot, is long-lasting and environmentally friendly. 

MORE EFFICIENT - FASTER - SAVING INSULATION!

Eclectia Spray Polyurethane Foam is an excellent insulating material applied to the surface by spray application method with the help of high pressure machine equipment, which becomes foam 30-40 times its volume in a few seconds. Spray Polyurethane Foam-SPF is applied by a high-pressure machine and requires very good technical knowledge and experience to obtain the best foam. 

Each cell in the liquid polyurethane foam applied expands by 30-40 times its volume in 1-2 seconds and does not have any thermal bridges. It creates a Polyurethane Foam which provides more effective, excellent thermal insulation than the materials. 

INSULATION ADVANTAGES 

Eclectia Spray Polyurethane Foam is the best known thermal insulation material. The application is extremely simple. Enables maximum insulation at minimum cost. Roof insulation, terrace insulation, basic curtain insulation, insulation between floors, exterior insulation (jacketing), pipeline insulation, fishing vessel insulation, cold storage insulation, freezers, climate controlled buildings (mushroom farms, poultry farms, animal shelters, etc.) Insulation of tanks, silos and tanks are some of the application areas.

In addition to providing excellent thermal insulation, Eclectia Spray Polyurethane Foam has the following advantages: 

Completely destroys heat bridges. 

Insulation is continuous, no cracks or voids occur. 

It provides access to even the most difficult corners. Thus, it provides maximum savings in heating costs in cold weather and cooling costs in hot weather. 

Its closed-cell structure and low heat conductive gases make Eclectia Spray Polyurethane Foam the best known thermal insulation material. 

The average application density is 35kg / m3.

It adheres very well to all surfaces except polyethylene (wood, tile, metal, concrete, etc.), no additional adhesive or mechanical fixing is required for mounting. 

A few minutes after application it hardens and becomes walkable.

Extremely lightweight.

It also provides significant sound insulation (50-55dB). 

It provides both thermal insulation and waterproofing in one operation.

No need to use water sealing tape.

Does not contain bacteria and pests. 

Water vapor permeability allows the surface to breathe, thus preventing condensation.

The application is made entirely by professional people. 

It provides very fast movement and ease of application. The material does not need to be stored in one place. It can be moved quickly for another job.

The application is completed in a very short time, thus saving time. Application can be made up to 750-1.500 m2 per day.

It can be applied to all old and new buildings.

The spraying process makes it possible to insulate irregularly shaped surfaces (domes, columns, roofs) thanks to its continuous properties (without application). It adheres very well to the surface and takes its shape.

M3 according to UNE 23727 standard, Class E flame resistance according to UNE EN 13501-1 standard. 

TSE 10981 (Thermal Polyurethane Foam for Thermal Insulation of Buildings).